Automated Wildfire Protection System: A Comprehensive Guide
Introduction
In the face of increasing wildfire threats, having an automated wildfire protection system is more crucial than ever. Our system is designed to be user-friendly and highly efficient, offering both manual and automatic activation options. Here’s how it works:
System Activation
Trigger: The system can be activated either by a virtual push button in a mobile app or by flame sensors.
Fire Department Override: In emergency situations, the Fire Department has the ability to override the system for immediate activation.
Pump Priming (Valve 1)
Action: The first step is to open Valve 1, which primes the pump with water from the source.
Pump Power Initialization
Action: A relay output, known as RO1, is used to activate the pump’s battery, powering up the system.
Pump Start
Action: The pump’s starter and choke are engaged for 3 seconds to initiate the pumping process.
Sprinkler Activation (Valve 2)
Action: Valve 2 is opened to route water to the sprinkler system, activating the sprinklers.
Vibration Sensor Monitoring
Action: A wireless vibration sensor is used to confirm that the pump is operational and running as expected.
Flow and Immersion Sensors
Flow Meter: This sensor checks the water flow rates to ensure optimal operation.
Immersion Sensor: This sensor monitors the water levels in the tank to prevent overflow or depletion.
Foam Proportioning and Zoning (Valves 3, 4, 5)
Action: Valve 3 is opened to enable foam proportioning.
Zones: The system activates Zone 1, which targets the roof, and Zone 2, which targets the sides of the house. Each zone is active for 20 minutes.
Landscape Irrigation (Valves 6, 7, 8)
Action: Valve 6 is opened to allow fresh water for landscape irrigation.
Zones: Zone 3 irrigates the North landscape, and Zone 4 irrigates the South landscape. Both zones are active for 20 minutes.
Continuous Monitoring
Sensors: The system employs a Pressure Immersion Sensor, Flow Meter, and Vibration Sensors for real-time monitoring.
Alerts: The system will alert you for empty tank conditions, abnormal flow rates, or excessive pump vibrations.
System Shutdown and Refill (Valves 2, 6, 9)
Action: All active valves are closed to shut down the system.
Refill: Valve 9 is opened to refill the water tank from an external source.
Fail-Safe: As a safety measure, Valve 9 will automatically close once the sensors indicate that the tank is full, preventing any overflow.
Conclusion
Our automated wildfire protection system is designed to offer maximum safety with minimum hassle. With its user-friendly interface and advanced sensor technology, it provides a comprehensive solution for wildfire protection.